Efisiensi Tiang Group Konfigurasi 2x2 Fondasi Helical Pile pada Tanah Gambut

Fadlan Fadlan, Ferry Fatnanta, Muhardi Muhardi

Abstract


Installation of helical pile foundations in different formations and distances will provide different bearing capacities in peat soils. For this reason, a correction value to the bearing capacity of the pile group is required, which is stated with efficiency. This paper aims to analyze the bearing capacity of the helical pile group configuration 2x2 with variations in the distance between the piles of 1.5D, 2.0D, 2.5D, & 3.0D on peat soils, as well as obtaining the efficiency values from the bearing capacity and from the Converse–Laberre formula. The analysis shows the efficiency of the pile for the distance between the 1.5D pile is 0.99, the distance of 2.0 D is 0.93, the distance of 2.5D is 0.86, and the distance of 3.0D is 0.79. The efficiency obtained from the Converse-Laberre formula for a distance of 1.5D is 0.44, a distance of 2.0D is 0.56, a distance of 2.5D is 0.64 and a distance of 3.0D is 0.70.


Keywords


Bearing Capacity; Efficiency; Helical Piles

Full Text:

PDF

References


ASTM D1143-81. 1994. Standard Test Method For Piles Under Static Axial Compressive Load. United States of America: Annual Book of ASTM Standards sec 4.

ASTM D1997-91. 2001. Standard Test Method For Laboratory Determination of The Fiber Content of Peat Samples by Dry Mass. United States of America: Annual Book of ASTM Standards sec 4.

ASTM D2974-00. 2000. Standard Test Method For Moisture, Ash, and Organic Matter of Peat and Other Organic Soils. United States of America: Annual Book of ASTM Standards sec 4.

ASTM D4427-92. 2002. Standard Classification of Peat Samples by Laboratory Testing. International Journal of the Physical Sciences. United States of America: Annual Book of ASTM Standards sec 4.

Coduto.D.P dkk.1994. foundation design principles and practices. Prentice- Hall inc., New Jersey.

Hardiyatmo,H,C. 2010. Analisis dan Perancangan Fondasi, Gajah Mada University press, Yogyakarta.

Perko Howard, 2009. Helical Piles (A Pratical Guide to Design and Installation). New Jersey : John Wiley & Sons, Inc.

Thilakasiri, H. S., Abeyasinghe,R.M., Tennakoon, B. L.,2006. “Dynamic Testing of End Bearing Bored Piles in Sri Lanka”, Annual Transactions of the Institution of Engineers, Sri Lanka. pp 85-95.

Septimarrna, V. 2016. Perilaku Fondasi Helical Pile Pada Tanah Gambut. Tesis. Universitas Riau.




DOI: http://dx.doi.org/10.33087/jiubj.v19i3.760

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

JIUBJ: Jurnal Ilmiah Universitas Batanghari Jambi
ISSN: 1411-8939 (print), ISSN: 2549-4236 (online)
Telpon: 0741670700
e-mail: jiubj.unbari@gmail.com | lppm@unbari.ac.id

Lisensi Creative Commons
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.