Peningkatan Produktivitas Perawatan Mesin Polisher dengan Penerapan TPM menggunakan Metode OEE di PB. Surya Agung

Dewi Ayuningtyas, Wahyudin Wahyudin, Dene Herwanto

Abstract


The purpose of this study was to analyze the effectiveness of the polisher machine using the Overall Equipment Effectiveness (OEE) method at PB. Surya Agung. The methods used in this study are the Pareto diagram and the cause-and-effect diagram (fishbone). The results of this study found that at PB. Surya Agung with the six big Loss method, six losses were obtained, including breakdown Loss, Setup and Adjustment Loss, idling and Minor Stoppage, Reduce Speed Loss, Defect Loss, Yield / Scrap Loss. The results of data processing obtained an average Overall Equipment Effectiveness value for 7 months in the period from January to July 2023 obtained a value of 65%, this value has not reached the Japan Institute of Plant Maintenance standard. The factor that has the largest percentage of the Six Big Losses factor on the polisher machine is Reduce Speed Losses with a value of 27%. which causes a decrease in machine effectiveness, this is because the machine / equipment and humans have not implemented the Total Productive Maintenance (TPM) concept.


Keywords


Overall Equipment Effectiveness (OEE), Six Big losses, Pareto Diagrams, and Cause-Effect Diagrams (Fishbone)

Full Text:

PDF

References


Handoko, H. T. 2021. Manajemen Produksi dan Operasi, Edisi 2 ed. Yogyakarta: BPFE.

Heizer, J., & Render, B. 2016. Opertion Management, 10th Edition ed. New Jersey: Person Education Inc: Global Edition.

Karmilawati, E. K., Mulyono, K. M., & Nugroho, S. N. 2021. Pendekatan OEE (Overall Equipment Effectiveness) Untuk Mengurangi Losses Pada Mesin Moulding Cerex. Jurnal Optimasi Teknik Industri (JOTI), 3(2).

Nakajima, S. 1988. An Introduction to Total Productive Maintenance (TPM). In The plant maintenance resource center.

Siswanto, Y., Hidayat, T., & Budi, D.R. 2023. Analisis Total Productive Maintenance Overall Equipment Effectiveness Moulding PMS Line. Jurnal Teknologi dan Manajemen.

Triwardani, D. H., Rahman, A., & Tantrika, C. F. M. 2013. Analisis Overall Equipment Effectiveness (OEE) Dalam Meminimalisi Six Big Losses Pada Mesin Produksi Dual Filters DD07. Jurnal Rekayasa Dan Manajemen Sistem Industri, 1(2).

Wasesa, A. J., & Jumali, M. A. 2020. Analisa Produktifitas Mesin Digital Printing “Sakurai Oliver 458 – EII” di Perusahaan Percetakan Sidoarjo . WAKTU: Jurnal Teknik UNIPA, 18(1), 46-51.




DOI: http://dx.doi.org/10.33087/jiubj.v25i1.5755

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

ADRESS JOURNAL

JURNAL ILMIAH UNIVERSITAS BATANGHARI JAMBI (JIUBJ)
Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat
Adress: Jl.Slamet Ryadi, Broni-Jambi, Kec.Telanaipura, Kodepos: 36122, email: jiubj.unbari@gmail.com, Phone: 0741-670700

Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.