Kajian Kebutuhan Alat Berat pada Pekerjaan Tanah Pembangunan Turap atau Pematangan Lahan Parkir Kecamatan Pelayangan Seberang Kota Jambi

Annisaa Dwiretnani, Ilham Alfhito Putra

Abstract


Heavy equipment commonly used in construction projects are Dump trucks, excavators, dozers, soil compactors such as rollers and compactors. The purpose of using these heavy equipment is to make it easier for people to do the work so that the expected results can be achieved more easily in a relatively shorter time and as a reference to find out the needs of the equipment used in the work location whether or not they are needed (Aoliya, 2017). In the pavement / ripening development project Pelayangan sub-district parking lot across the city of Jambi the heavy equipment used is; excavators, dump trucks and dozers. The project which began in June 2017 was completed in December 2017. Based on observations of researchers in the field for the use of 2 (two) pieces of excavator used, 1 (one) dozer, and 20 (twenty) dump trucks. The use of heavy equipment used in the field is not yet known optimal productivity. An analysis of the calculation of the needs of heavy equipment is needed in the construction project of the pavement / ripening of the parking area of Pelayangan Seberang Subdistrict, Jambi City. This study consists of several stages, namely calculating the production capacity of each heavy equipment, calculating the value of productivity, then calculating the number of each tool needed, and in the final stage comparing the number of tools analyzed according to calculations with the number of tools in the field.


Keywords


Heavy Equipment, Heavy Equipment Needs, Heavy Equipment Productivity

Full Text:

PDF

References


Afandi, M. C. (2014). Perhitungan Produktifitas Alat Berat dalam Pekerjaan Longsoran pada Ruas Jalan Simpang Perdau–Batu Ampar sta 25+ 750 1 Titik Kecamatan. Sangkulirang Kab. Kutai Timur. Kurva S Jurnal Mahasiswa, 4(1), 153-160.

Gafur, A. (2013). analisa perhitungan produktifitas alat berat pada pelaksanaan pematangan lahan untuk pembuatan work shop di kabupaten. Malinau pada dinas pekerjaan umum Provinsi Kalimantan timur. Kurva S jurnal mahasiswa, 1(1), 1-7.

Ilahi, R. R., Ibrahim, E., & Swardi, F. R. (2014). Kajian Teknis Produktivitas Alat Gali-muat (Excavator) Dan Alat Angkut (Dump Truck) Pada Pengupasan Tanah Penutup Bulan September 2013 Di Pit 3 Banko Barat PT. Bukit Asam (Persero) Tbk Upte. Jurnal Ilmu Teknik, 2(3).

Pratasis, P. A. K. (2016). Kelayakan investasi studi kasus alat berat Buldozer, excavator dan dump truck di kota Manado. Jurnal Sipil Statik, 4(9).

Rajasa, A. C. C. Analisa penggunaan alat berat berdasarkan pada efisiensi pekerjaan galian pembangunan Jember Icon.

Rochmanhadi.1982 Alat – alat Berat dan Pengunaannya. Jakarta : Yayasan Badan Penerbit Pekerjaan Umum.

Rochmanhadi 1984. Perhitungan Biaya Pelaksanaan Pekerjaan Dengan Menggunakan Alat Berat . Jakarta : Yayasan Penerbit Pekerjaan Umum.

Suyono sosrodarsono. Perhitungan biaya pelaksanaan pekerjaan dengan mengunakan alat – alat berat, Dapartemen pekerjaan umum.

Rostiyanti Faneta Susy, 2008. Alat berat untuk proyek Kontruksi.jakarta, Penerbit: Rineka Cipta.

Tugas Akhir , 2014, Analisa Perhitungan Kebutuhan Alat Berat Pada Proyek Peningkatan Jalan Simpang Seling- Muaro Jernih Kabupaten Merangin,Afriadi.




DOI: http://dx.doi.org/10.33087/jiubj.v19i2.686

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

JIUBJ: Jurnal Ilmiah Universitas Batanghari Jambi
ISSN: 1411-8939 (print), ISSN: 2549-4236 (online)
Telpon: 0741670700
e-mail: jiubj.unbari@gmail.com | lppm@unbari.ac.id

Lisensi Creative Commons
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.