Analisis Wake Area Desain Mobil Box dengan Simulasi Aerodinamika
Abstract
The standard box car design has a large drag and wake area which results in high fuel consumption. One way to reduce drag and wake area is to modify the box car design. Modifications were made by adding an aerokit spoiler and deflector to a standard box car which is expected to reduce drag and wake areas. The next step is to design a simulation using CFD-based CAD. The analysis was carried out with three variations of speed, namely 60 km/hour, 80 km/hour and 100 km/hour. The simulation results show that the design of the box car with the modification of the addition of aerokit spoilers and deflectors can reduce the drag and wake areas.
Keywords
Full Text:
PDFReferences
Byrne, C. E. I., 1999. Aerodynamics of Road Vehicles—4th edition.. The Aeronautical Journal, 103(1026), 398-398.
Grivanzy, Andre., 2011, Analisis Pengaruh Kontrol Aktif Aliran Berupa Blowing Terhadap Drag Aerodinamika Model. Depok: Univ Indonesia.
Kourta A, Gillieron P, 2009. Impact of the automotive aerodynamic control on the economic issues. Journal of Applied Fluid Mechanics, 2(2), 69-75
Munson, B. 2002. Mekanika Fluida, Penterjemah: Harinaldi & Budiarso, Jakarta, Airlangga.
Prihadnyana, Y., Widayana, G., & Dantes, K. R. 2017. Analisis aerodinamika pada permukaan bodi kendaraan mobil listrik gaski (ganesha sakti) dengan perangkat lunak ansys 14.5. Jurnal Pendidikan Teknik Mesin Undiksha, 5(2).
Rauf, W. 2020. Analisis Pengaruh Kontrol Aktif Separasi Aliran Pada Model Kendaraan Terhadap Hambatan Aerodinamika, Doctoral dissertation, Universitas Hasanuddin.
Yogatama, M., & Trisno, R. 2018. Studi Koefisien Drag Aerodinamika pada Model Ahmed Body Terbalik Berbasis Metode Numerik. Jurnal Teknik Mesin (JTM), 7(1).
DOI: http://dx.doi.org/10.33087/jiubj.v22i2.2147
Refbacks
- There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
|



