Pengaruh Variasi Daya Pompa pada System Pendinginan TEG terhadap Tegangan yang Dihasilkan TEG
Abstract
The amount of heat energy wasted on the furnace wall is of concern to researchers who are trying to utilize the heat energy wasted from a furnace wall as a generator or source of electricity. The waste heat from the combustion in the furnace can now be used as a source of electricity. The waste heat is converted into electricity using a thermoelectric generator, the TEG generator is an electrical generator device that converts heat (temperature difference) directly into electrical energy. In this research, the heat used is the cylindrical wall of the furnace with variations in the size of the pump that flows the coolant to the waterblock, to determine the efficiency and magnitude of the power pump used to cool the hot side of the TEG, which produces a high temperature difference and also produces large electrical energy. thermoelectric generator module reused 4 pieces SP1848 27145 SA module.
Keywords
Full Text:
PDFReferences
Cedar, Jonathan, and Alec Drummond. 2009. “The BioLite Woodgas Campstove.†http://www.vrac.iastate.edu/ethos/files/ethos2009/Manufacturing/BioliteEthos.pdf.
Cheng, Fuqiang et al. 2019. “Fabrication of Nanostructured Skutterudite-Based Thermoelectric Module and Design of a Maximum Power Point Tracking System for the Thermoelectric Pile.†IEEE Sensors Journal 19(14): 5885–94.
Gao, H. B. et al. 2016. “Development of Stove-Powered Thermoelectric Generators: A Review.†Applied Thermal Engineering 96: 297–310.
Gomaa, Mohamed R., and Hegazy Rezk. 2020. “Passive Cooling System for Enhancement the Energy Conversion Efficiency of Thermo-Electric Generator.†Energy Reports 6: 687–92. https://doi.org/10.1016/j.egyr.2020.11.149.
Hasan Nia, M. et al. 2014. “Cogeneration Solar System Using Thermoelectric Module and Fresnel Lens.†Energy Conversion and Management 84(June 2021): 305–10. http://dx.doi.org/10.1016/j.enconman.2014.04.041.
Li, Guoneng, Youqu Zheng, Jiangen Hu, and Wenwen Guo. 2019. “Experiments and a Simplified Theoretical Model for a Water-Cooled, Stove-Powered Thermoelectric Generator.†Energy 185: 437–48. https://doi.org/10.1016/j.energy.2019.07.023.
Li, Xinchun, and Zhongwei Wang. 2017. “Exergy Analysis of Integrated TEG and Regenerative Cooling System for Power Generation from the Scramjet Cooling Heat.†Aerospace Science and Technology 66: 12–19. http://dx.doi.org/10.1016/j.ast.2017.02.021.
Montecucco, A., J. Siviter, and A. R. Knox. 2017. “Combined Heat and Power System for Stoves with Thermoelectric Generators.†Applied Energy 185: 1336–42.
Orr, Bradley, and Aliakbar Akbarzadeh. 2017. “Prospects of Waste Heat Recovery and Power Generation Using Thermoelectric Generators.†Energy Procedia 110(December 2016): 250–55. http://dx.doi.org/10.1016/j.egypro.2017.03.135.
Rezk, Hegazy et al. 2019. “Hybrid Moth-Flame Optimization Algorithm and Incremental Conductance for Tracking Maximum Power of Solar PV/Thermoelectric System under Different Conditions.†Mathematics 7(10).
Sari, Citra. 2021. “Morowalikab.Go.Id.†https://morowalikab.go.id/home/read/atasi-persoalan-listrik-pemkab-morowali-gelar-rapat-dengan-pihak-pln.
Twaha, Ssennoga, Jie Zhu, Yuying Yan, and Bo Li. 2016. “A Comprehensive Review of Thermoelectric Technology : Materials , Applications , Modelling and Performance Improvement.†65: 698–726.
DOI: http://dx.doi.org/10.33087/jiubj.v22i1.2017
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
|
